Concrete structure covered with beech treads and risers. The treads, newel posts and handrail were stained golden oak and finished with polyurethane varnish, while the risers and intermediate balusters were painted white, also with polyurethane varnish. A wooden skirting board, also white, was fitted along the wall.
Category: Concrete or metal covering
Walnut colour staircase, without risers
Concrete staircase covered with beech treads stained walnut and protected with polyurethane varnish. The risers of the staircase are whitewashed concrete. The newel posts are also stained and varnished. The intermediate balusters are finished with white polyurethane varnish. For protection, a wooden skirting board was fitted along the wall on the whole right side of the staircase.
Concrete staircase covered with steamed beech treads and risers, turned balusters, all stained golden oak
Concrete staircase covered with steamed beech treads and risers, 2 turned balusters on each tread, all stained golden oak, with a skirting board along the wall in the same colour and a landing cut to follow the shape of the plasterboard-clad walls.
Beech staircase covering stained walnut with a curved railing
Walnut colour beech covering, without risers
Concrete staircase covered with steamed beech treads, walnut colour. To protect the wall, a 6 cm strip was fitted, which has both a decorative and a practical role.
The staircase has a railing both on the inside and along the wall. The newel posts and the intermediate balusters are milled.
Metal structure covering
Metal structure covered with natural beech treads. The treads follow the shape of the metal structure and at the top a landing was fitted to give access to the two offices. The railing is made of wrought iron, and so is the handrail.
Staircase covering, natural beech
Concrete staircase covered with natural beech treads and risers. The staircase is made of three flights and two landings. The newel posts have a section of 80×80 mm and the intermediate balusters 45×45 mm. Two balusters were fitted on each tread so that the gap between them is no more than 12 cm. A cover strip was fitted along the wall and on the outside.
Natural beech covering without risers
Concrete staircase covered with steamed beech treads, natural varnish, without risers. The staircase is made of 5 winder treads and 7 straight treads. To give it a modern feel, the version without risers was chosen, with 6 cm high strips fitted to protect the wall. The railing was fitted on the outside of the flight so as not to reduce its width. The balusters are turned.
Natural oak staircase covering
Concrete staircase covered with oak treads and risers, natural finish. To hide the gaps left between the wall and the treads, cover strips were fitted both on the inside and on the outside of the staircase. The railing was fitted on a wooden rail so that an equal distance could be kept between the intermediate balusters on the sloped part, and on the straight part so that the parquet could be laid easily. Because the upper railing was long, an intermediate newel post was added.
Beech staircase covering, walnut colour
Concrete structure covered with steamed beech treads, walnut colour, without risers. The staircase structure has three flights and two landings. The balusters were fitted close to one another, so they have both a practical and a decorative role.
Golden oak tread covering
Concrete structure covered with oak treads, stained „golden oak”. Cover strips were fitted on the sides of the staircase to give it a solid look. The intermediate balusters were fitted on a wooden rail to make cleaning the treads easier and to keep equal distances between the balusters, even though the treads are not all the same width.
Walnut colour beech staircase covering, concrete structure
Concrete structure covered with steamed beech treads, walnut colour, without risers. To keep the wall from getting dirty, 6 cm strips were fitted on the exposed wall. The newel posts have a section of 105×105 mm, a size that gives them a solid look. That solid look also comes from the intermediate balusters, which have a section of 55×70 mm.
Dark wenge colour ash covering
Concrete structure covered with ash treads stained dark wenge. Cover strips were fitted on the sides of the staircase, with both a decorative and a practical role: they give the staircase a solid look and at the same time keep the wall from getting dirty. The intermediate posts were fitted on wooden rails to make wiping the treads easier. The intermediate posts have different widths and thicknesses, giving the staircase a modern feel. For the same reason, the distances between the posts are not equal either, ranging from 6 to 15 cm.
Concrete covering with ash treads
Concrete structure covered with ash treads. Cover strips were fitted on the sides of the staircase, with both a decorative and a practical role: they give the staircase a solid look and at the same time keep the wall from getting dirty. The intermediate balusters were fitted on wooden rails to make wiping the treads easier.
Metal staircase covering with bookcase shelves
Metal structure covered with beech treads. Under the metal structure a beech structure was built that follows the outline of the treads and forms a set of shelves, which in this case will be used as a bookcase.
Beech staircase covering, walnut colour
Concrete staircase covered with steamed beech treads and landing, stained walnut. No risers were fitted on this staircase, to give it a modern look and at the same time a feeling of space. The railing, fitted later, is wrought iron.
Beech staircase, colonial colour
Beech treads stained colonial colour. A 12 mm thick strip was fitted on the sides of the treads, which is both decorative and hides the gaps left next to the wall.
Stained beech staircase, metal structure
Beech treads and risers stained to match the colour of the parquet, fitted on a metal structure.
Cherry colour beech staircase, metal structure
Steamed beech staircase, stained cherry. The treads have a half-round shape, to give an impression of width.
Stained oak staircase
Staircase covered with oak, stained cherry. Strips were fitted on both sides of the staircase to hide the small flaws of the walls. The newel posts are 80 mm thick and the intermediate balusters, fitted on every tread, 45 mm.
Oak staircase
Concrete staircase covered with oak, stained „golden oak”. The staircase has a turn made of 7 treads cut at an angle. To protect the wall, strips were fitted on both sides of the wall, which also gives the staircase a touch of elegance and a solid look. The newel posts are 80 mm thick and the intermediate ones 45 mm.
Beech staircase, wrought iron railing
Concrete staircase covered with steamed beech, natural varnish. The treads were fitted without risers and without cover strips, to give the staircase an elegant look.
Cherry staircase, ash balusters
Concrete staircase covered with cherry wood. For this staircase the owner chose a variety of materials, one for each part, as follows: the treads are cherry, the balusters and handrail are ash, and the risers and cover strip are spruce. The end result is a mix of colours with a pleasant impact.
Ash railing, wenge colour
Making and fitting an ash railing for a concrete staircase covered with tiles. So as not to reduce the width of the staircase further, the railing was fitted on the outside of the flight, each baluster being fixed to a wooden prism fitted beforehand. A handrail was fitted on the wall to help when climbing and also to keep the wall from getting dirty.